Compare Prices for Classic Engineering 10800 Boring Jig Kit

Buy Classic Engineering 10800 Boring Jig Kit

Classic Engineering 10800 Boring Jig Kit Product Description:

• Classic Engineering boring jig kit
• Built for the professional yet easy to use
• Basic fixture for standard 2-3/8-inch and 2-3/4-inch backset positioning
• Includes heavy-duty carrying case and easy to follow illustrated instruction sheet
• Backed by 1-year warranty

Customer Reviews

Most helpful customer reviews

49 of 50 people found the following review helpful.
Reliable, Accurate, Strong
By Daniel A. Koblosh
Dozens of doors--it never fails. Handles all common backsets and diameters.

Do order the smaller-diameter spade bits for the edge bore. The standard 1" is a bit large for some lock fronts. 15/16" and 7/8" are available from boringjigs.com, Classic Engineering's website. Also available: carbide bits for cross boring.

The bits are actually driven by the drill via a quick disconnect adapter. You chuck up the adapter and then hook up to the bits, both of which have to mounted into the jig before you mount the jig onto the door. Get the adapter with the 1/2" shaft. The 3/8" shaft can do the job but there is a lot of torque cutting a 2-1/8" lock bore and the 3/8" adapter shaft can bend. The 1/2" adapter shaft is very stout.

This device works from the edge and one side. You don't have to bore from both sides of the door. Also, bore the edge bore to full depth first. That way there is less material for the 2-1/8" bit to remove and it goes faster.

I like to use my 1/2" Milwaukee Hole-Hawg drill. The two speeds and excellent power really go. High speed for the edge bore, low for the cross bore.

14 of 15 people found the following review helpful.
Huge Time Saver
By Bryan
I don't do a ton of doors so I have been getting by with hole saws and such. Hole saws take a lot of time and they can be difficult to perfectly line up from one side of the door to the other. I finally bought this kit and man what a difference! I have used it for about 16 doors so far and it is one sweet tool. Each door has come out perfect. I used to fear doors, now I actually look forward to doing them with this tool and my Porter Cable plane. I will buy the carbide bits when the steel bits start getting dull.

8 of 9 people found the following review helpful.
Door Boring Made Easy
By Richard Cozzens
Today I used the Classic Engineering Boring Kit for the 1st time. The set up was incredablely easy and very accurate. The holes were smooth, and very precise. The only thing I am not happy about is the unavailability of the bits for this kit. Maybe I have just not located the correct place to purchase spare bits. They are not available @ The Home Depot and I could not find them in Tool Crib. Overall this tool is very well built and does it's job well

See all 13 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Where Can I Buy Porter-Cable 59381 Hinge Butt Template Kit

Buy Porter-Cable 59381 Hinge Butt Template Kit

Porter-Cable 59381 Hinge Butt Template Kit Product Description:

• Offers a quick, simple and accurate solution when hanging multiple doors
• Provides the capacity to hang both 3 and 4 hinge doors
• 3 hinge template set up enables the routing of hinges on doors and frames between 6' and 7' in height
• 4 hinge template set up enables the routing of hinges on doors and frames between 7 feet and 8 feet in height
• Accommodates hinge sizes from 3-inch to 6-inch, in 1/2-inch increments

Customer Reviews

Most helpful customer reviews

43 of 43 people found the following review helpful.
Professional results - big time saver
By John Blazich
I recently took delivery of this hinge template and am very happy with it's performance. I couldn't decide which template to buy - this one or the Bosch - and went with this one when I found out that Bosch won't work with other brand routers.

Set-up of this template is very easy once you become familar with the components. I have been struggling with the ABS Porter Cable hinge template (around $20). This works fine for the occasional door, but this template is a huge timesaver. First, it allows you to cut all hinge mortises with one set-up - no more moving the template for each hinge, measuring and re-measuring etc. Secondly, the template transfers directly from door to jamb and vice-versa, meaning a perfect match every time.

The only weak points are that the included but is high-speed steel rather that carbide tipped, and that the included guide bushing will cut mortises for 1/4" radius hinges only. Other radii require an additional guide bushing and bit. It would also be helpful if the thickness (height) of this template was the same as the ABS Porter Cable latch mortise template so that you could use both templates without changing your router set-up.

Overall, I definitely recommend this tool for anyone hanging more than an occasional door.

24 of 24 people found the following review helpful.
Carpenter .... Trim
By J Armstrong
I've owned this same template for 20 yrs and can put it together and rout butts with my eyes closed if I had to ... I wore out 3 skill Butt Templates prior to that (still have one of those) and finally bought this one to last a lifetime ... I know nothing about the Bosch and do not need to as long as I have this Porter Cable Butt Template .

31 of 33 people found the following review helpful.
Nice hardware, but...
By A Customer
Everything is solid as you would expect, but plan on buying extra router bits, collars, and jamb gauges depending on the size of hinges and the corner radius of the hinges.

See all 38 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Best Ingersoll-Rand 2131 1/2-Inch Ultra Duty Air Impact Wrench

Buy Ingersoll-Rand 2131 1/2-Inch Ultra Duty Air Impact Wrench

Ingersoll-Rand 2131 1/2-Inch Ultra Duty Air Impact Wrench Product Description:

• Heavy-duty 1/2-inch air impact wrench
• 600 ft./lbs. of torque in reverse and up to 450 ft./lbs. of forward torque
• 360-degree swivel inlet and handle exhaust
• Built in power regulator; different torque settings for different jobs
• 2-year limited manufacturer's warranty

Customer Reviews

Most helpful customer reviews

21 of 21 people found the following review helpful.
Looking for an impact? Look no further.
By A Customer
I've gone through probably 6 or 8 impacts (maybe more) in my career. It wasn't until 4 years ago, my tool salesman recommended the 2131. At first I wasn't to sure about the composite housing. Then I hooked it up and it sounded really wimpy! I thought I made a mistake. No way. This thing has such balance and control it's awesome. The one thing I've noticed is the harmonics in the hammer mechanism gives a more smooth and balanced torque to whatever you're working on. As far as durability goes, I've dropped mine several times and is still going. The power is a different story. This thing has loosened stuff a 3/4 inch drive gun wouldn't move! It's easy to control and easy to work with for extended periods of time because of the weight. Mine has lasted four years and is still going strong. It is the only choice for a powerful 1/2" impact!

17 of 17 people found the following review helpful.
Fantastic
By jar
I work catapiller in there truck shop. When doing an rebulding an engineI don't have to get my 3/4" impact wrench out to pull the mains or rods, not evan on most head bolts. It is a work of art. I love it. It is light and compact, and fits my hand perfectly.

16 of 17 people found the following review helpful.
IR-2131 - Best buy at a great price point
By Ken
Truely a great piece of work. Lightweight with adjustable torque setting up to 450 ft-lbs in forward, unreal 600 ft-lbs max in reverse. Too cool! All this at a price less than some heavier and larger impact wrenches. Make sure you dial your air pressure to the recommended 90 psi before running it though, it'll spin way faster in reverse than you think!

See all 12 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Low Cost Ingersoll-Rand 261 3/4-Inch Super Duty Air Impact Wrench

Buy Ingersoll-Rand 261 3/4-Inch Super Duty Air Impact Wrench

Ingersoll-Rand 261 3/4-Inch Super Duty Air Impact Wrench Product Description:

• Heavy-duty, lightweight 3/4-inch air impact wrench
• Jumbo hammer mechanism
• Up to 1,100 ft./lbs. of torque
• Trouble-free performance aided by the pressure-feed lube system
• Weighs 12.4-pounds

Product Description

This Ingersoll Rand air impact wrench combines compact size and high performance, making it ideal for everything from spring work to pinion nut and track pad removal and major engine teardowns. Impacts Per Minute (IPM): 1,000, Variable Speed: Yes, Average Air Consumption (CFM): 9.5, Reversible: Yes, Speed - No Load (RPM): 5,500, Forward Torque (ft.-lbs.): 900, Standard Bolt Capacity (in.): 1, Tool Length (in.): 8 13/16, Min. Hose Size (in.): 1/2, Tool Weight (lbs.): 12.4, Max. Reverse Torque (ft.-lbs.): 1,100, CFM at Load: 38, Working Torque (ft.-lb.): 200-900, Max. Torque (ft.-lbs.): 1,100, Noise Level (dB): 98.1, Drive (in.): 3/4, Inlet Size (in.): 3/8

Customer Reviews

Most helpful customer reviews

25 of 25 people found the following review helpful.
Best around
By A Customer
This impact wrench is by far the best 3/4 wrench around. I purchased mine a little over a year ago and have had nothing but trouble free use. I've used many other brands and models and this is definately the most powerful, bar none. It is a serious HOSS. My wrench has removed many stubborn yoke nuts that a 1 inch impact could not budge. Everyone in the shop wants to use it instead of the shop tool because of it power, light weight and ease of use. I highly recommend this impact wrench for anyone looking for such a tool.

1 of 1 people found the following review helpful.
ir 261 impact
By jim eitzen
did all the things i expected, spring bolts , head bolts, no problems at all, glad I got it, thanks.

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Online Kett KD-440 14 Gauge Double-Cut Shears

Buy Kett KD-440 14 Gauge Double-Cut Shears

Kett KD-440 14 Gauge Double-Cut Shears Product Description:

• Lightweight, pistol-grip shear
• Cuts over 150 inches per minute
• Leaves sheets cool and burn free
• Cuts 14 gauge mild steel and most grades of stainless to 16 gauge
• Distortions are absorbed in an easily disposed of waste curl

Product Description

The KD-440 variable-speed, double-cut shears cut C.R. mild steel up to 14 gauge in straight or contour lines at over 150 inches per minute, most grades of stainless to 16 gauge.

Customer Reviews

Most helpful customer reviews

12 of 12 people found the following review helpful.
Kett KE440 14-Gauge Power Shears A nice addition to my tools
By A Customer
I read the only review of this product before I ordered mine.. and the previous reviewer seems not to like his... so with a slight amount of trepidation I ordered a shear of my own.... ( I already own the 18 guage version and the 16 gage additional head) I am currently working on a project covering skateboard ramps with 14 guage steel to protect them from the elements... I didn't think my 16 guage shear was going to be long for this world using it on the heavier metal...So I got this one... It is doing an awe-inspirng job.... I have used in the past the shears with two jaws... like the Bosch and the Dewalt....and for doing tight radius' they are great... but these cut straight lines effortlessly and will do larger radii quite well. On a skate ramp 5 foot radii would be tight... I am thoroughly satified with these shears and would highly recomend them to anyone...The Variable speed option is great.... I didn't think I would care about it....I would however ..based on my previous experience with Kett products, get a spare set of teeth (jaws?) because surprizes happen... All in all I'm very happy.. I would also reccomend the metal case... It's a handy place to keep your spare cutters and the grease...

4 of 4 people found the following review helpful.
This shear is great!!!
By T. Schindler
I purchased this shear for a school shop. We have put it through all the paces in the shop. It hasn't faultered once and doesn't show any signs of wear. We have cut 14 all the way down to 22 gauge steel and have not had any issues with it. I talked to several shop owners who use the Kett shears for various materials. None of them had any complaints about the shear. I would talk to people in your area about shears and see what they are using. I am more than impressed with the one I purchased.

5 of 6 people found the following review helpful.
buy a dewalt
By R. Main
My new Kett KE440 shears quit after one hour of use. Motor wasn't getting juice, loose wire. It took Kett an unreasonably long time to turn around the warranty repair, and they had to be called once and asked where is it. Seems the product quality is low, and the people aren't too concerned about their buyers. Buy a DeWalt, I did.

See all 9 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Low Price Kett KD-442 16 Gauge Variable-Speed Scissor Shears

Buy Kett KD-442 16 Gauge Variable-Speed Scissor Shears

Kett KD-442 16 Gauge Variable-Speed Scissor Shears Product Description:

• Cuts 16 gauge mild steel and 18 gauge stainless
• Also cuts spiral pipe
• Metal doors and metal studs
• Portable
• 0

Product Description

The KD-442 variable speed shear easily cuts through 16 gauge C.R. mild steel and stainless to 18 gauge. The steel shear head has close cutting heavy duty blades that quickly cut through sheet metal, spiral pipe, metal doors and metal studs. Double cutting action provides maximum sheet usage without burring or buckling the material. At less than 5 pounds this KETT shear is both portable for location usage and durable for daily shop operations.

Customer Reviews

Most helpful customer reviews

19 of 20 people found the following review helpful.
the best tool for the job
By John R. Corey
I do a lot of diffrent types of things from autobody to home repair and I have used kettshears at the ship yards before this pair beets them all cts through steel like butter and is the best tool for auto restro

9 of 10 people found the following review helpful.
Kett , Model K442 16-gauge variable speed shears
By Scott E. Green
For a living , I work with sheets of copper , aluminum , and sheet metal. I started out useing air shears. Then went to a better pair of air shears. They worked ok. But taking the compressor , hoses , etc. to every job site got old in a hurry. Not to mention that the compressor didn't quite keep up with the air shears. After 50+ copper roofs , I thought I would try electric shears. So I did my reserch. These Kett shears were my choice. Let me tell you. These Kett shears make the air shears look sick. No comparison. The Kett shears are variable speed , and very powerfull. Lots of power to spare. No heavy air hose to drag and catch on things. No compressor and hoses to lugg around. Etc. , Etc.. I would recommend these shears to anyone who wants a good quality pair of shears. I rated these shears at a "5" , and now I know why the others had also rated them at a "5". The metal box (an option) is a little big for the shears , but it works. The box is very well built , and is worth the money.

7 of 8 people found the following review helpful.
Like a Hot Knife Thru Butter
By Kevin W. Youngs
Wish I would have purchased this Kett shear months ago. Can't believe the speed and smoothness of the cut. Quite a time saver!

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Compare Prices Baldor 662R 6-Inch 1/3-Horsepower Industrial Duty Big Red Grinder/Buffer

Buy Baldor 662R 6-Inch 1/3-Horsepower Industrial Duty Big Red Grinder/Buffer

Baldor 662R 6-Inch 1/3-Horsepower Industrial Duty Big Red Grinder/Buffer Product Description:

• Two-piece tool rest permitting vertical and horizontal adjustments
• Tool rests can be tilted at any angle
• Complies with OSHA standards
• 3 Year Warranty
• 1/3 hp / 3600 RPM

Product Description

6" Grinders - 6" x 3/4" x 1/2"; 115 Volts; Single phase; 60 Hz - Guards are non-exhaust type; Grinder/Buffer supplied with one 36 grit grinding wheel and one wire brush wheel (0.014 wire)

Customer Reviews

Most helpful customer reviews

12 of 12 people found the following review helpful.
The last bench grinder made in the US
By Markus M. Strobl
After Devalt, Ryobi and all the other ones moved production to China, Baldor is still making their products in the US. And it's a very good product. Their 1/3 HP motor is stronger than the Chinese "1/2 HP". The unit is well balanced and very sturdy. Highly recommended.12/16/2012: 5 years later and the Baldor is still like new. Over the years it has seen plenty of use and it is always up to the task.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!