Buy Freud SD308 8-Inch Safety DadosFreud SD308 8-Inch Safety Dados Product Description:
- Produces flat-bottomed, splinter-free grooves or rabbets
- Carbide-tipped
- AKD limiters reduce kickback and overfeeding
- Maximum cut width: 13/16 inches
- 15-degree hook angle
Product Description
Freud's Safety Dado Sets provide the highest quality results while maintaining a superior level of safety.stacked dado set with it's razor sharp outside blades will produce grooves or rabbets which are flat-bottomed and more precise than other styles and with the use of Freud's Shim Set (sold separately - SS100) the kerf width can be adjusted by as little as .004" for the correct fit.on all table saws, and radial arm saws for cutting slots, groves, dadoes, and rabbets in softwood or hardwood. Application: Safe and Splinter Free Dadoes
Customer Reviews
Most helpful customer reviews
35 of 35 people found the following review helpful.
Clean and sharp dados
By Alan L. Wieskamp
I've run this dado set through just about every material there is and it produces sharp sidewalls and flat bottoms every time. The blades run true and with about 150 lineal feet of material run through, the teeth are still sharp. Just remember to clean the resin or glue residue from the cavity behind each tooth as it builds up easily and starts to burn the work piece. I have a Jet contractor's saw with the 1.5 hp motor. The dado insert you can order from Jet will only accomodate a 6" dado set. You will have to use a zero clearance insert to make your own, otherwise you can use the metal one from Jet and limit the depth of cut to about 1 1/4". Kind of defeats the purpose of the 8" blade. Also these blades are heavy and if you use the entire stack, the 1.5 hp motor does not have enough power to cut a dado to more than 3/4". You will have to make more than one pass to cut one deeper effectively.
10 of 10 people found the following review helpful.Great performance, excellent price.
By Robert J. Hogan
I just received this dado set for Christmas. I set it up on my Jet contractor saw and cut 3/4" dados 3/8" deep in pine, oak, and melamine with no problems whatsoever. The dados were absolutely flat with no tearout in the pine or oak. There was a microscopic amount of tearout on the melamine, but I had to search extremely hard and squint just right to see it. My saw never even began to slow or "bog" down even when cutting the oak. For the average woodworker, this set is perfect. I am extremely satisfied.
9 of 9 people found the following review helpful.Flat, Clean Dadoes
By A Customer
Right out of the box onto my Delta table saw, cut flat bottomed dadoes with no splintering. Case came with the scantest instructions and didn't diagram all the thickness combinations. I may pick up the shim kit for less than 1/8" increment set ups.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
