Buy JET 708620B AFS-1000B 550/702/1044 CFM 3-Speed Air Filtration System with Remote and Electrostatic Pre-FilterJET 708620B AFS-1000B 550/702/1044 CFM 3-Speed Air Filtration System with Remote and Electrostatic Pre-Filter Product Description:
- Air filter system with remote and electrostatic pre-filter; includes programmable timer
- Filters 98 percent of all 5-micron particles; 85 percent of 1-micron particles
- Durable steel housing
- Includes filter system, remote, electrostatic filter, and eyebolts to hang on ceiling or place on workbench
- 30-1/4 by 24 by 12 inches; 54 pounds; 5-year warranty
Product Description
The Jet 3-speed air filtration systems clean and circulate the air in your shop while you work, filtering 98-99 of all particles, five microns in size and 85 of particles one micron in size. And with the timer, you come into your shop, set the timer for two, four or eight hours and forget it. The system automatically shuts down at the time youve set. They use a convenient standard size outer filter, run quietly and come with a remote control for convenience.Grabs 98 of anything from 5 microns up in size and 89 of single micron size particles. Prefilter is 5 micron. Inner filter is 1 micron. Outer filter is a disposable electrostatic filter with a paper frame. Units are designed to be set on a workbench or hung from the ceiling, either tight against the ceiling or hanging from chains. Eyebolts are in place for hanging the unit. The three pocket filter fits inside, and can be blown out. Filters are easily replaced, without tools. The powder coated metal box is heavy duty. Fan and motor are also constructed for durability. Two easy grip handles inset on both sides for ease of handling. Quiet running so it can be left on during work. Model AFS-1000B is 1044 CFM and has 3 speed: 550, 702 and 1044 CFM. The AFS-1000B can filter the air in a 20 x 20 x 8 shop in under five minutes, and filter the air in that size shop a dozen times an hour. Includes a paper filter.
Customer Reviews
Most helpful customer reviews
201 of 202 people found the following review helpful.
Does a Great Job
By Matthew Schenker
Like a lot of woodoworkers, I put off buying an air filtration system longer than I should have. It's one of those things that realy should be done BEFORE you begin to set up a shop area. Well, I finally did my research on available machines and decided to buy the Jet. I'm glad I did. It definitely does a terrific job, is relatively quiet, and it mounts easily to the ceiling. The filters are easy to change -- just flip four clips and pull out the filter. The machine is also fairly lightweight, making it easier to mount. The remote control is a great feature, allowing you to turn the machine on and off from a distance, set the "speed" (hi, medium, or low), and set the timer (it has settings for 2, 4, and 6 hours). The timer is a very useful feature, since you can set the machine to run for 2 hours as you're leaving the shop, and you don't have to remember to come back down to turn it off as you do with other machines.
My ultimate test was sanding a large maple table top. I'll describe what it was like doing this before and after I got the Jet system.
BEFORE: My shop measures 30' long by 20' wide. Before I had this machine (when I had no air filtration system at all) whenever I sanded a table top the shop got filled with dust really quickly. Even after I stopped sanding, the dust hung in the air for maybe half an hour. And the next day, I'd come into the shop and see a thin layer of dust settled on everything.
AFTER: Now that I use this machine, the air never gets as dusty as it used to (even in the middle of sanding). Also, within five minutes after I'm done sanding, the air is crystal clear. By leaving the machine on after I'm all done, whatever dust remains is taken care of. The next day, coming into the shop, there is no dust on anything.
* * * * * *
As a final note, I give it four stars because the remote does not allow 360-degree access. But this is a relatively small matter with such a great machine.
89 of 90 people found the following review helpful.
Clean Air, yipee!
By Wayne Cease
I have a dust collector, but there is still a lot of fine particles that get missed, especially when sanding. The AFS-1000 picks up where the dust collector leaves off.
The low speed is very quiet, and it starts gently, which is really nice for a unit that hangs from the ceiling. You can mount it on a wall too. It comes with hardware for both types of mounting, but no chains. Not only are batteries included, Jet even includes two pieces of velcro to stick the remote somewhere!
Having a remote makes this a piece of cake to turn on/off. The LED's on the unit are large, so it is easy to see what settings are on (Speed: low, medium, high and Time: 2, 4, 8 hours).
85 of 87 people found the following review helpful."Too soon old, Too late smart"
By G. Elore
You know what they say - "Too soon old, too late smart". I've been woodworking and doing carpentry work for years. Until recently I've been guilty of not always using the proper protective gear for the task at hand. I now have a pretty well equipped workshop and this was one of the last major items that I purchased. It should have been one of the first.
I purchased the Jet AFS-1000 about a year ago and it has been among the best workshop investments I've ever made. The air in my shop has been crystal clear most of the time for the past year.
I bought this unit after reading numerous reviews - just like you are doing now - and decided on this one because of the features it offers. Two of the best features are the remote control and the timer.
As suggested in the instruction manual, I ceiling mounted the unit. The ceilings in my shop are 9'6" so it would have been impractical to use a control that was mounted on the unit proper. Some units offer a switch on the power cord, but that would entail letting the cord dangle so that you could reach the in-line switch. Jet solved this dilema by equipping this unit with an infra-red remote control. Yes, just like your television, you must have line-of-sight between the remote and the control panel on the filter, but I find this not to be a problem at all. With the remote, you are able to control all functions of the filter including, on & off, the 3 speeds, and the timer.
Speaking of the timer, most times when I am going to be producing sawdust, I just set the timer for 4 or 8 hours and forget it. When I'm finished for the day, I just walk away and let the unit continue to clean the air until it automatically shuts off. The next time I come into the shop, the air is clean and there is much less sawdust coating my machinery, etc.
If you do much woodworking at all, you need an air filtration system. Do yourself a favor and get this one, it's among the best available.
See all 221 customer reviews...Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
