Buy DEWALT DW222 3/8-Inch 0-1200 rpm VSR Drill w/Keyless Chuck 6.7 ampDEWALT DW222 3/8-Inch 0-1200 rpm VSR Drill w/Keyless Chuck 6.7 amp Product Description:
- Helical-cut steel, heat-treated steel gears for long life and durability
- Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience
- Two-finger, rubber trigger for increased comfort
- Large, 2-finger variable speed trigger control
- Heat-treated gears provide long-lasting durability
Customer Reviews
Most helpful customer reviews
15 of 17 people found the following review helpful.
Can you say "Hella torque" ?
By Smaug
I can't believe the torque on this thing! I'm not sure if an extra handle is available for this, but if it is, get it. The single sleeve keyless chuck takes away any disadvantages of a keyless chuck. It's got a spindle lock so you can use your whole hand to wrench on the chuck to make sure it's tight. In addition, it's geared low so it gets really tight. The rear grip is figured just right to fit your hand "carpenter's style" That is, squeeze the trigger with your ring and pinky finger while putting the pushing force from behind with your palm and first two fingers. The yellow color makes it hard to lose or leave behind. If you're getting a drill for woodworking, you might want more speed instead of this much torque. If it's going to be used all around, (metal included) either this or a 1/2" Milwaukee is the one to get.Update: Feb 23, 2008I've sold this on ebay a couple years ago. Most of what I do with a drill is woodworking. For woodworking, you need a drill with higher RPM rather than the massive torque of this drill. Chances are that if you need this kind of torque, you also need a 1/2" chuck. The problem is most 1/2" drills don't have such a nice keyless chuck as this little beauty. I miss it occasionally, but only occasionally. Still a great product if you need the torque but will never need a 1/2" chuck. (such as drilling in metal) If I were to do it again, I'd probably get a 1/2" hammer drill to compliment my cordless drill and milwaukee 2500 RPM Magnum Holeshooter. This way, I have the other drills for wood, and the new one for masonry and metal work.
3 of 4 people found the following review helpful.
SOLID CORDED DRILL
By P. A Kilcoyne
I purchaced the dw222 of a clearance rack for 50.00. I find that it is a fine drill,I really like the drills push button spindle lock. It is simple, but it works great. The chuck is simple (does not ratchet)but it holds bits tight. I think the trigger is a bit too sensitive(on mine).Its torque is good,but for big bits I find that I must watch the rpms,this drill does stall.My Milwaukee magnum 302 has never stalled in the 3 years I have owned it. The DW 222 excells in drilling small to medium bits.For bigger stuff I use my magnum or one of my three 18v drills.I find that the 18v drill have better low end torque in low gear(as long as the batteries are charged) The cordlesses will be useful only as long as the batteries last and can be replaced.The dw222 will most likely out live me.Overall: a fine drill
0 of 0 people found the following review helpful.It turned out to be a very good choice.
By Pablo Liendo
During my evaluation I hesitated because some previous buyers considered that this drill was not fast enough for woodworking jobs. In addition others considered that it was difficult to control the speed (i.e. for screwing). I disagree with both remarks. It turned out to be a very good choice.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
