Rough Country 873 - 2.5-3-inch Leveling Lift Kit for Toyota: Tundra 2WD Product Description:
- Fitment:
Toyota: 07-12 Tundra 2WD - Kit Contents:
Front: Strut extensions
Rear: 1.5-inch lift blocks and u-bolts - Benefits:
Allows for up to 33-inch tires
Increased ground clearance
Maintains factory ride quality
100% simple bolt-on installation
Truck can be easily returned to stock
Levels front of the vehicle with the rear
Adjustable
Shim plates allow you to fine tune the front amount of lift
No strut disassembly or strut compressor required for installation - Technical Notes:
- Item Specifics:
Manufacturer: Rough Country Suspension Systems
Part Number: 873
Weight (Lbs): 22
Install Time (Hours): 3-4
Wheel Backspacing (Inches): Factory
Recommended Tire Size: 285/65
Product Description
Description:
Rough Country's 2.5-3-inch Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33-inch tire. This kit now includes two sets of 1/2-inch spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8-inch of lift. Use both for a full 3-inch level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Country's in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Country's Lifetime Replacement Warranty.
873 - 2.5-3-inch Leveling Lift Kit
Customer Reviews
Most helpful customer reviews
0 of 0 people found the following review helpful.
good lift
By cesar duran
It made my 2010 tundra double cab look better. The kit was easy to install and it came with great instructions. It probably took me about an 2 hours to install the entire lift by my self. I do have alot of tools that helped though, like an impact wrench. Make sure to get the truck aligned after the lift is installed. On a side note, although the instructions are great, I have a tip on installing the rear blocks. (Friend of mine does this for a living and told me how to do it by elimintating alot of steps and cutting down the install time)Instructions call for removal of wheels, shocks, etc. Save time and do this.** While on a level surface, craw under the bed and remove one side of the U-bolts. Get a jack and place it directly under the leaf spring. Lift the leaf spring until the gap is big enough to slide the block in. Lower the leaf spring and attach the new U-bolts and tighten. Repeat on other side. seriously took me about 15-20 minutes using an impact wrench.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!